![Altex Epoxy Primer (2-pack) 1.25L](http://bartonmarine.co.nz/cdn/shop/products/epoxy_20primer_20altex_20x_crop_center.jpg?v=1710791364)
Altex
Altex Epoxy Primer (2-pack) 1.25L
No. 1 Epoxy Primer
Features:
No.1 Epoxy Primer is the basis for High Performance marine systems.
Epoxy Primer No.1 is recommended for use as :
No.1 Epoxy Primer may also be used to seal off prepared, aged coatings prior to repainting - refer also to No.4 Epoxy Sealer Undercoat.
No.1 Epoxy Primer is ideal for use below the water-line as a tie coat between aged epoxies and Altex Yacht & Boat Antifoulings:- No. 5 Ablative, No. 10 Semi-Ablative, Vivid, Hydrocoat.
Limitations: No. 1 Epoxy Primer is a thin film adhesion primer. It is not designed for thick film application - apply at 50 - 75µm maximum. Further, it is not designed to be sanded - refer to No.2 High Build Sanding Surfacer and No.3 Primer Undercoat.
Advantages:
Specific Data:
- Touch Dry 1 Hr,
Hard Dry 8 Hrs
- Minimum - 2 Hr with self, No.3 or No.5 Antifouling
Maximum Aged - 24 Hrs with Various Antifouling (see above), 3 months with self or No.3