Altex Regatta Gloss Enamel 0.5L

Marine Gloss Enamel

Features:

Marine Gloss Enamel is designed for use as the finishing coating for the Single Component Marine topsides system.

Marine Gloss Enamel can also be used :

• For signwriting and boot stripes
• For up-grading existing enamel systems, subject to correct preparation and undercoating
• On canoes, tenders, dinghies, trailer yachts and power boats

Advantages:

• High gloss enamel finish
• Marine quality
• Good weathering properties
• Good gloss retention
• Good application characteristics

Specific Data:

• Generic Type: Polyurethane Modified Gloss Finish
• Colour: refer Altex Yacht & Boat Colour Chart
• Packaging: 500ml (NZ Only), 1 and 4 litre, Single component
• Gloss: High Gloss
• Flash Point: 35oC
• Thinner: Altex Thinner #53 or #45
• Storage: Store under cool, dry conditions
• Density: 1.21 kg per litre
• Volume Solids: 50%
• Theoretical Coverage Rate: 10 sq metres per litre at 50 microns dry
• Recommended Film Thickness Per Coat: 80-100 microns wet to obtain 40-50 microns dry
• Application: Spray, brush or roller
• Dry Times (50 µm DFT / 25oC / 50% RH):
  • Touch Dry : 1½ Hr
  
  
  • Hard Dry : Overnight
• Recoat Time (50 µm DFT / 25oC / 50% RH): Recommended : Overnight (max 5 days without sanding)