TruDesign
TruDesign Plastics Skin Fitting - Long Thread Domed
$13.50
/
Tax included.
TruDesign Plastics Skin Fitting - Long Thread Domed
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings.
TruDesign Skin Fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings.
TruDesign Plastics Skin Fitting - Long Thread Domed Features :
- ISO 9093-2021 Small craft -TRUDESIGN Skin Fittings and Ball Valves comply with ISO 9093:2021 and certified by the International Marine Certification Institute (IMCI).
- American ABYC H-27 – 500Lb static load test - TRUDESIGN Skin Fittings and Ball Valves meet the American ABYC H-27 – 500Lb static load test; Seacocks, Thru-Hull Fittings, and Drain Plugs – independently verified by IMANNA Laboratory Inc.
- • For sizes 1¼” through to 3” the ABYC Collar it is not a requirement to meet this static load test.
- • TruDesign ABYC Load Bearing Collar is required for the size ¾ and 1” to meet this static load test.
- • The ½” does not meet the 500Lb static load test with or without the ABYC collar
- Manufactured from a glass-reinforced nylon composite - High strength and light weight
- Compatible with all hull types - Can be used on aluminium, steel, wood or GRP hulls up to 100mm thick
- Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion
- Chemical resistant - Impervious to diesel, petrol and antifouling paints
- UV resistant - Will not degrade or discolour with ultraviolet light from the sun
- High quality surface finish - Will not discolour with green film as similar bronze fittings do
- Paintable - Can be painted with all types of antifouling
- Limited Warranty
- TruDesign accepts no responsibility for Ball Valves or Skin Fittings which are not installed as per manufacturers instructions.
